Skip to content

Event check-in: the day-of runbook

Published

Last verified

A ticket's QR code scanned by a phone that shows a check mark.

At 7:05pm, a 400-seat theater has 180 people in line, the scanning app has frozen, and the support form promises a reply within two business days. Every part of that night can be planned for: how many scanners the door needs, who runs will call, what happens when the wifi dies, and who solves problems so the line keeps moving. This guide is the plan for the event check-in process, with a one-page runbook to print.

TL;DR

  • About 60% of the house arrives in the busiest 30 minutes, by our estimate. Staff for that half hour, not for the average.

  • One scanner checks about 7 people a minute with tickets in a phone wallet, by our estimate: 210 in 30 minutes. A 400-seat theater needs two scanners plus one person on will call.

  • Print the will-call list. Phones die; paper does not.

  • Test offline scanning the day before. Test support a week before, at the hour your doors open.

  • One person owns every problem at the door. Everyone else scans.

Who this is for: venue GMs, box office managers, conference ops leads, and volunteer coordinators. The rooms in this guide: a 220-cap club with one door, a 400-seat theater with will call and reseating, and a 1,500-person two-day conference with a registration desk.

How many scanners do you need?

Count the people who arrive in the busiest 30 minutes, divide by what one scanner handles in that time, and round up. Then add will call. By our estimate, about 60% of the house arrives in that half hour, and one scanner checks about 7 people a minute with tickets in a phone wallet, or 210 in 30 minutes.

Room

House

Peak 30-minute arrivals (60%)

Per scanner in 30 minutes (7 a minute)

Scanners

Plus will call

220-cap club

220

132

210

1

1

400-seat theater

400

240

210

2

1

1,500-person conference, day one

1,500

900

210

5

2

Table 1: scanners for the busiest 30 minutes. At the conference, will call is the badge desk.

These are our estimates, not measurements. Printed PDFs and screenshots run closer to 4 a minute, by our estimate, which turns 210 into 120: the club needs two scanners and the conference eight. Your own door is the better number. Stand by a scanner for five minutes with a stopwatch, count, and use that next time.

What does the arrival curve look like?

At a show, a trickle when doors open, then a wall, then a tail to showtime. By our rule of thumb, the wall comes 20 to 45 minutes after doors. A conference front-loads instead: most people come for the first session, so the registration desk's peak sits before it.

Staff for the wall. Have every scanner on when doors open, and one spare person ready to step onto a scanner when the line passes the door. A seated show has its own door questions, like the screenshot shared twice and the group that bought apart. The reserved seating guide covers them.

What goes on the will-call list, and who runs it?

Will call tickets are kept at the box office for pickup, usually against ID. The list has each name, the order number, how many tickets, the seat if seated, and whether ID is needed. Sort it by last name.

One person runs it, away from the scan line. The scanners never do.

Print it the day before, two copies. Phones die; paper does not. Print the full attendee list too, for the moment a phone dies with 50 people in line.

What happens when the wifi dies?

Either the scanner keeps working offline and syncs later, or it stops, and you find out tonight. Find out the day before instead. With signal, open the event on every scanning phone. Turn on airplane mode, scan a test ticket, turn the signal back on, and check that the check-in synced.

Two things are true of any scanner that works offline. A phone checks tickets against the list it last downloaded, so a ticket bought after it lost signal may not be on it. Send that person to whoever owns problems. And two phones that are both offline can each admit the same ticket, because neither knows about the other until they sync.

Who handles the problems?

One named person owns reseating, refunds, transferred tickets, the screenshot shared twice, and "I bought two but only one came through." Everyone reaches that person the same way, by radio or a group text. A scanner who leaves the line to solve a problem stops the line.

Give that person what the scanners do not have: the printed lists and a login that can look up orders. They also need a way to issue a refund or a comp, or a direct line to whoever can.

How do you know support will answer at showtime?

Test it. A week out, at the hour your doors open, send your ticketing platform's support a real question and write down when a person replies. That reply time is your showtime support, whatever the website promises. If your shows are on Friday nights, test on a Friday night.

How do you run check-in, step by step?

Download the runbook as a PDF: the same steps as a one-page event check-in checklist, with a blank row in the scanner table for your own numbers. Print it and write a name next to every owner.

  1. Doors minus 7 days: Send support a real question at the hour your doors open, and write down when a person replies. (Door lead)

  2. Doors minus 7 days: Do the scanner math below. Name the scanners, the will-call person, and the one person who owns problems. (Door lead)

  3. Doors minus 7 days: Invite each door person with door-only access, and have each one sign in to the check-in app on their own phone. (Door lead)

  4. Doors minus 1 day: With signal, open the event on every scanning phone. Turn on airplane mode, scan a test ticket, turn signal back on, and check that it synced. (Each scanner)

  5. Doors minus 1 day: Export the attendee list, sort it by last name, and print the will-call list and the full list. Two copies of each. (Will call)

  6. Doors minus 1 day: Charge every phone. Pack battery packs and cables. (Each scanner)

  7. Doors minus 90 minutes: Door brief: who scans, who runs will call, who owns problems, and how to reach them (radio or group text). (Door lead)

  8. Doors minus 90 minutes: Set the lines: one line per scanner, and will call to the side, away from the scan line. (Door lead)

  9. Doors minus 90 minutes: Check that every phone shows the right event and scans. (Each scanner)

  10. Doors: Scan. Any problem goes to the person who owns problems. Scanners stay in the line. (Scanners)

  11. Doors: If the line reaches the street, move a spare person onto a scanner. (Door lead)

  12. Doors plus 30 minutes: Compare checked in against tickets sold for each ticket type. Note the no-shows. (Door lead)

  13. After the show: Export the check-in list. Write down what broke and how long the line got, and keep it with this runbook. (Door lead)

What this looks like on Eventrise

Event ticket scanning on Eventrise runs on a phone, in the Eventrise organizer app. It keeps the event's guest list on the phone, keeps checking people in without signal, and syncs the check-ins when the signal comes back. If two phones checked in the same ticket while offline, the first check-in to reach Eventrise is kept and the other phone shows it as a conflict.

A refunded ticket shows as refunded and does not get in. When a code will not scan, search the guest's name and check them in by hand. Checking in on the app has the steps.

Door staff get the Volunteer role: check-ins on the events you assign them, and no order or financial access. The Box Office role adds attendee lookup and comped orders, which suits the person who owns problems. Refunds sit with the Owner, Admin and Billing Manager roles. Roles and permissions lists them all.

For the printed lists, export the attendee list from Reports, under "Check-in & attendees", and sort it by last name before you print. Comps are on the same list as paid tickets. The check-in report shows, for each ticket type, how many tickets are checked in against how many are valid.

When you write to support, a person replies. The organizer app is on the downloads page, and box office covers selling at the door.

FAQ

Does the check-in app work without wifi?

Yes. The Eventrise organizer app keeps the guest list on the phone, checks people in without signal, and syncs when the signal returns. Test it in airplane mode the day before.

Can volunteers check people in without seeing sales?

Yes. The Volunteer role checks people in on the events you assign and has no access to orders or money.

How do I handle someone whose ticket was transferred?

Scan the ticket the new holder shows: a transfer gives them a ticket of their own. If it will not scan, search their name in the app, or send them to the person who owns problems with the original buyer's name.

What if two people show the same QR code?

The first scan checks the ticket in. With signal, the second scan shows that the ticket is already checked in, and when. Send the second person to whoever owns problems, who can look up the order. If two phones are both offline, both can admit it, and the first check-in to sync is kept.

How do I reconcile scans against tickets sold?

Open the check-in report. For each ticket type, it shows how many tickets are checked in against how many are valid. Check it 30 minutes after doors and again after the show.

Get the organizer app

Related guides

All guides